XDG Base Directory Specification

Waldo Bastian


            
          

Ryan Lortie


            
          

Lennart Poettering


            
          

Johannes Löthberg


            
          

Version 0.7

24th November 2010


Table of Contents

Introduction
Basics
Environment variables
ARCH-ID
Referencing this specification

Introduction

Various specifications specify files and file formats. This specification defines where these files should be looked for by defining one or more base directories relative to which files should be located.

Basics

The XDG Base Directory Specification is based on the following concepts:

  • There is a single base directory relative to which user-specific data files should be written. This directory is defined by the environment variable $XDG_DATA_HOME.

  • There is a single base directory relative to which user-specific configuration files should be written. This directory is defined by the environment variable $XDG_CONFIG_HOME.

  • There is a single base directory relative to which user-specific executable files should be written. This directory is defined by the environment variable $XDG_BIN_HOME.

  • There is a single base directory relative to which user-specific architecture-independent library files shoule be written. This directory is defined by the environment variable $XDG_LIB_HOME.

  • There is a set of preference ordered base directories relative to which executable files should be searched. This set of directories is defined by the environment variable $XDG_BIN_DIRS.

  • There is a set of preference ordered base directories relative to which library files should be searched. This set of directories is defined by the environment variable $XDG_LIB_DIRS.

  • There is a set of preference ordered base directories relative to which data files should be searched. This set of directories is defined by the environment variable $XDG_DATA_DIRS.

  • There is a set of preference ordered base directories relative to which configuration files should be searched. This set of directories is defined by the environment variable $XDG_CONFIG_DIRS.

  • There is a single base directory relative to which user-specific non-essential (cached) data should be written. This directory is defined by the environment variable $XDG_CACHE_HOME.

  • There is a single base directory relative to which user-specific runtime files and other file objects should be placed. This directory is defined by the environment variable $XDG_RUNTIME_DIR.

All paths set in these environment variables must be absolute. If an implementation encounters a relative path in any of these variables it should consider the path invalid and ignore it.

Environment variables

$XDG_DATA_HOME defines the base directory relative to which user-specific data files should be stored. If $XDG_DATA_HOME is either not set or empty, a default equal to $HOME/.local/share should be used.

$XDG_CONFIG_HOME defines the base directory relative to which user-specific configuration files should be stored. If $XDG_CONFIG_HOME is either not set or empty, a default equal to $HOME/.config should be used.

$XDG_BIN_HOME defines the base directory relative to which user-specific executable files should be stored. If $XDG_BIN_HOME is either not set or empty, a default equal to $HOME/.local/bin should be used.

$XDG_LIB_HOME defines the base directory relative to which user-specific architecture-independent library files should be stored. If $XDG_LIB_HOME is either not set or empty, a default equal to $HOME/.local/lib should be used.

$XDG_DATA_DIRS defines the preference-ordered set of base directories to search for data files in addition to the $XDG_DATA_HOME base directory. The directories in $XDG_DATA_DIRS should be seperated with a colon ':'.

If $XDG_DATA_DIRS is either not set or empty, a value equal to /usr/local/share:/usr/share should be used.

$XDG_CONFIG_DIRS defines the preference-ordered set of base directories to search for configuration files in addition to the $XDG_CONFIG_HOME base directory. The directories in $XDG_CONFIG_DIRS should be seperated with a colon ':'.

If $XDG_CONFIG_DIRS is either not set or empty, a value equal to /etc should be used.

$XDG_BIN_DIRS defines the preference-ordered set of base directories to search for executable files in addition to the $XDG_BIN_HOME base directory. The directories in $XDG_BIN_DIRS should be seperated with a colon ':'.

If $XDG_BIN_DIRS is either not set or empty, a value equal to /usr/local/bin:/usr/bin should be used.

$XDG_LIB_DIRS defines the preference-ordered set of base directories to search for architecture-independent library files in addition to the $XDG_LIB_HOME base directory. The directories in $XDG_LIB_DIRS should be seperated with a colon ':'.

If $XDG_LIB_DIRS is either not set or empty, a value equal to /usr/local/lib:/usr/lib should be used.

The order of base directories denotes their importance; the first directory listed is the most important. When the same information is defined in multiple places the information defined relative to the more important base directory takes precedent. The base directory defined by $XDG_DATA_HOME is considered more important than any of the base directories defined by $XDG_DATA_DIRS. The base directory defined by $XDG_CONFIG_HOME is considered more important than any of the base directories defined by $XDG_CONFIG_DIRS.

$XDG_CACHE_HOME defines the base directory relative to which user specific non-essential data files should be stored. If $XDG_CACHE_HOME is either not set or empty, a default equal to $HOME/.cache should be used.

$XDG_RUNTIME_DIR defines the base directory relative to which user-specific non-essential runtime files and other file objects (such as sockets, named pipes, ...) should be stored. The directory MUST be owned by the user, and he MUST be the only one having read and write access to it. Its Unix access mode MUST be 0700.

The lifetime of the directory MUST be bound to the user being logged in. It MUST be created when the user first logs in and if the user fully logs out the directory MUST be removed. If the user logs in more than once he should get pointed to the same directory, and it is mandatory that the directory continues to exist from his first login to his last logout on the system, and not removed in between. Files in the directory MUST not survive reboot or a full logout/login cycle.

The directory MUST be on a local file system and not shared with any other system. The directory MUST by fully-featured by the standards of the operating system. More specifically, on Unix-like operating systems AF_UNIX sockets, symbolic links, hard links, proper permissions, file locking, sparse files, memory mapping, file change notifications, a reliable hard link count must be supported, and no restrictions on the file name character set should be imposed. Files in this directory MAY be subjected to periodic clean-up. To ensure that your files are not removed, they should have their access time timestamp modified at least once every 6 hours of monotonic time or the 'sticky' bit should be set on the file.

If $XDG_RUNTIME_DIR is not set applications should fall back to a replacement directory with similar capabilities and print a warning message. Applications should use this directory for communication and synchronization purposes and should not place larger files in it, since it might reside in runtime memory and cannot necessarily be swapped out to disk.

ARCH-ID

The arch-id part of $XDG_BIN_HOME and $XDG_LIB_HOME are the same as the tuples used by Debian's Multiarch Specification, which are normalized GNU triplets. For example `i386-linux-gnu' for Linux on x86 and `x86_64-linux-gnu' for Linux on x86_64.

Referencing this specification

Other specifications may reference this specification by specifying the location of a data file as $XDG_DATA_DIRS/subdir/filename. This implies that:

  • Such file should be installed to $datadir/subdir/filename with $datadir defaulting to /usr/share.

  • A user specific version of the data file may be created in $XDG_DATA_HOME/subdir/filename, taking into account the default value for $XDG_DATA_HOME if $XDG_DATA_HOME is not set.

  • Lookups of the data file should search for ./subdir/filename relative to all base directories specified by $XDG_DATA_HOME and $XDG_DATA_DIRS . If an environment variable is either not set or empty, its default value as defined by this specification should be used instead.

Specifications may reference this specification by specifying the location of a configuration file as $XDG_CONFIG_DIRS/subdir/filename. This implies that:

  • Default configuration files should be installed to $sysconfdir/xdg/subdir/filename with $sysconfdir defaulting to /etc.

  • A user specific version of the configuration file may be created in $XDG_CONFIG_HOME/subdir/filename, taking into account the default value for $XDG_CONFIG_HOME if $XDG_CONFIG_HOME is not set.

  • Lookups of the configuration file should search for ./subdir/filename relative to all base directories indicated by $XDG_CONFIG_HOME and $XDG_CONFIG_DIRS . If an environment variable is either not set or empty, its default value as defined by this specification should be used instead.

If, when attempting to write a file, the destination directory is non-existant an attempt should be made to create it with permission 0700. If the destination directory exists already the permissions should not be changed. The application should be prepared to handle the case where the file could not be written, either because the directory was non-existant and could not be created, or for any other reason. In such case it may chose to present an error message to the user.

When attempting to read a file, if for any reason a file in a certain directory is unaccessible, e.g. because the directory is non-existant, the file is non-existant or the user is not authorized to open the file, then the processing of the file in that directory should be skipped. If due to this a required file could not be found at all, the application may chose to present an error message to the user.

A specification that refers to $XDG_DATA_DIRS or $XDG_CONFIG_DIRS should define what the behaviour must be when a file is located under multiple base directories. It could, for example, define that only the file under the most important base directory should be used or, as another example, it could define rules for merging the information from the different files.